Saturday, August 10, 2013


Water Storage
Commercially bottled water in PETE (or PET) plastic containers may be purchased. Follow the container’s “best if used by” dates as a rotation guideline. Avoid plastic containers that are not PETE plastic.
If you choose to package water yourself, consider the following guidelines:
Containers
Use only food-grade containers. Smaller containers made of PETE plastic or heavier plastic buckets or drums work well.
Clean, sanitize, and thoroughly rinse all containers prior to use. A sanitizing solution can be prepared by adding 5 ml (1 teaspoon) of liquid household chlorine bleach (5 to 6% sodium hypochlorite) to 1 liter (one quart) of water. Only household bleach without thickeners, scents, or additives should be used.
Do not use plastic milk jugs, because they do not seal well and tend to become brittle over time.
Do not use containers previously used to store non-food products.
Some good choices:
30-55 gallon FDA approved food grade plastic barrels                                               5 gallon plastic jugs                                                                                                  two-liter soda bottles
Water Pretreatment
Water from a chlorinated municipal water supply does not need further treatment when stored in clean, food-grade containers.
Non-chlorinated water should be treated with bleach. Add 8 drops of liquid household chlorine bleach (5 to 6% sodium hypochlorite) for every 4 liters (one gallon) of water. Only household bleach without thickeners, scents, or additives should be used.

Storage
Containers should be emptied and refilled regularly.
Store water only where potential leakage would not damage your home or apartment.
Protect stored water from light and heat. Some containers may also require protection from freezing.
The taste of stored water can be improved by pouring it back and forth between two containers before use.
Water Purification
If your water supply is not known to be safe or has become polluted, it should be purified before use. Water purification is generally a two-step process.
Step 1: Clarify
Cloudy or dirty water must first be made clear. It should be passed through filter paper, fine cloth, or some other filter. It should be allowed to settle, and then the clear water on top can be carefully drawn. Filtered or clear settled water should always be disinfected before use.
Step 2: Disinfect
Boiling Method
Bringing water to a rolling boil for 3 to 5 minutes will kill most water-borne microorganisms. However, prolonged boiling of small quantities of water may concentrate toxic contaminants if present.
Bleach Method
Adding 8 drops of fresh liquid household chlorine bleach (5 to 6% sodium hypochlorite) to every 4 liters (one gallon) of water will kill most microorganisms. Only household bleach without thickeners, scents, or additives should be used. The use of bleach does not address toxic contamination.
Commercial Water Filters
Commercial water filters can effectively filter and purify water contaminated with microorganisms, toxic chemicals, and heavy metals. Their effectiveness depends on design, condition, and proper use.
Water storage for 72-hour kits
You should store 1 gallon of water per person, per day.
example: A family of 5 should have 15 gallons of water in their 72-hour kit.
Find ways to help make that water easily portable in case you need to ‘grab and go’ quickly. (Storing all 15 gallons in one container would not be easily carried)

These 8-gallon containers on wheels can work well. Easily transported.
                                   
                                                                  (for sale on Amazon for $35)